Iphone 6S Battery Problems, Reasons and Solutions

The Apple iPhone 6S features a non-removable 2915mAh Lithium-Ion battery with a design capacity for around 2800 charging cycles. Common knowledge says that after about 400 to 500 cycles, a Li-Ion battery degrades to 80% of its full capacity. Considering your iPhone 6S battery lasts for one day, you need to think of replacing the battery after a year or two depending on the usage and care taken. For better knowledge of your iPhone’s battery, you can check various statistics through apps like Battery Life. Iphone 6S battery problems after 1-2 years of usage is highly possible and in that case you might to get a new battery depending upon the issue.

iphone 6s battery problems

Some indications that you need to change your iPhone 6S battery:

  • Random reduction in battery percentage even when you are not using your iPhone.
  • Battery percentage dropping suddenly to 1% before switching off.
  • High battery drainage even on Airplane mode.
  • A swollen battery, which is generally caused by charging your phone at high temperature.
  • Sometimes a bulged battery lifts the display from the surface and can cause other problems.

How to maintain in future:

  • The first and most simple step for extending your battery life is to turn down brightness settings to the lowest level that is comfortable for you.
  • Always make sure that your Apple device is using the latest version of iOS available for that particular model.
  • Heat is bad for any kind of battery, and so are cold temperatures, so it’s best to keep your iPhone at room temperature as much as you can.
  • It is recommended that you do a full zero to 100% battery recharge (a “charge cycle”) maybe once a month only. This recalibrates the battery, a bit like restarting your computer.
  • Charging your device when it’s inside certain styles of cases may generate excess heat, which can affect battery capacity. If you notice that your device gets hot when you charge it, take it out of its case first.
  • For optimal performance, calibrate your newly installed battery: Drain battery below 10%, then charge uninterrupted to 100%.
Posted in iPhone and tagged , , , .

Leave a Reply

Your email address will not be published. Required fields are marked *